• 24 Port 10/100 Base-T PoE Switch with 2 x 10/100/1000 Base-T/SFP Combo Ports

• Support IEEE 802.3af  and 802.3at PoE Standard

• IEEE 802.1Q Virtual LAN (VLAN)

•  Support Auto Surveillance VLAN (ASV), Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

High-performance switch delivering wire-speed 10-Gigabit switching, routing, and ultra-low latency.

• 20 x 10GBASE-T ports • 4 x 10GBASE-T/SFP+ Combo ports • Physical stacking with up to 4 devices per stack • Layer 2+ static routing / RIPv1/v2/ng • Optional Layer 3 dynamic routing / OSPF • Data Center Bridging (DCB) features • Hot-swappable power supplies and fan modules

•  Up to 300 Mbps Wireless Speed Performance on IEEE 802.11n Single Band

•  Support self-configuring cluster  to enable effortless provisioning

•  Up to 16 virtual access points (VAP) may be created from a single access point

•  Up to 16 SSIDs  to assign different access privileges to different groups

•  802.3af Power Over Ethernet enables installation at hard to reach locations

•  Support Dynamic Auto-Channel Selection in Standalone Mode

•  Support Load balancing to optimise high network traffic volume and redundancy

•  Automatic RF Adjustment and management in densely AP deployment

• Standard Compliance
• Compliant with IEEE 802.3z Gigabit Standard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

Intended for use with the DMC-1000 chassis, this redundant power supply unit acts as a fail-safe against power failure.

• 24 Ports 10/100/1000 Base-T PoE + 2 SFP Ports + 2 x 10G SFP+ Slots

• Support IEEE 802.3af (PoE) and 802.3at (PoE+) Standard

• Physical Stacking via two 10 Gigabit SFP+ Ports with stacking up to six device

• Virtual stacking of up to 32 units via D-link’s Single IP Management (SIM)

• Support G.8032 ERPS to achieve high reliability  and network stability

• Auto Surveillance (ASV), Auto Voice VLAN for VoIP and Video Surveillance deployments.

• 802.1X port based authentication, for authentication through external RADIUS servers

• IEEE 802.3az Energy Efficient Ethernet with  D-Link Green 3.0 power-saving features

• Loopback Detection automatically disables port or VLAN when a loop is detected

• Support Layer 2 Features – IGMP & MLD Snooping, 802.3x  Flow control  and LLDP

Bidirectional SFP Transceiver 1 Port 10GBASE-LR (without DDM) for singlemode fiber optic cable, power supply 3.3V (up to 20km), WDM (TX: 1330nm, RX: 1270nm)

• IEEE 802.11 AC wireless standard with up to 1200 Mbps Speed

• Concurrent Dual Band operation for Increase Network Capacity

• Gigabit LAN with 802.3af Power over Ethernet support

• Automatic Network Traffic Prioritization with WMM QoS Feature

• Support Up to 26 dBm high power design

• Band Steering and Bandwidth Optimization support

• Multiple operating modes - AP, (WDS) with AP,WDS/Bridge & Client

• Support AP Array and Central WiFi Manager (CWM)

• Network Access Protection (NAP)

• Standard Compliance
• Compliant with IEEE 802.3z GigabitStandard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

• Standard Compliance
• Compliant with IEEE 802.3z GigabitStandard
• Self-contained in Standard Small Form Pluggable (SFP) Package
• Simplex LC Connector
• Interoperable with D-Link Switches
• Long-Distance Fiber Application
• Maximum 10 km Fiber Cable Distance (DEM-330T/330R)
• Maximum 40 km Fiber Cable Distance (DEM-331T/331R)
• Use Single-mode Fiber Cable
• Use Single Fiber Strand for Transmission/Reception
• Optimal Bidirectional Operation
• Gigabit Operation
• Bidirectional Operation Using Separate Transmit and Receive Wavelengths
• Versatile, Sturdy Devices
• Single 3.3V Power Supply
• Hot Swappable
• Durable Metal Enclosure

- 1000BASE-SX port (IEEE 802.3z standard) - Duplex LC connector - Full duplex operation - 802.3x flow control support - Fiber type: 50um or 62.5um multi-mode fiber up to 550 m - Wave length: 850nm - Power support: 3.3V - Hot pluggable - Class 1 laser product complies with EN 60825-1 - TTL signal detect indicator - Metal enclosure for lower EMI

• 10BASE-T/100BASE-TX copper port
• 100BASE-FX fiber port
• SC connectors
• Multimode fiber

• Cost-effective solution for 10G fiber connection
• Small form factor, allowing higher port densities for 10G connections
• Lower power dissipation
• Hot-pluggable
• Compliant with Ethernet 802.3ae
• Compliant with fiber MSA (Multiple Source Agreement)

• 24 Port 10 Gigabit SFP +

• Attain up to 480G stacking bandwidth with four devices functioning together as one

• Supports Lossless Ethernet Feature via Data Center Bridging (DCB)

• Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN)

• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)

• Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)

• Switch Resource Management (SRM) for flexible management of system resources

• Physical Stacking via four 10G ports, can stack up to 4 devices

• Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management

 

• - Supports cascade chaining for control of up to 4096 PCs
• - Features on-screen display(OSD)
• - Supports up to 2048 x 1536 monitor resolution

• 48 Port 10/100 Base-T POE Switch with 2 x 10/100/1000 Base-T Ports

• Support 2 x 10/100/1000 Base-T/SFP Combo Slots

• IEEE 802.1Q Virtual LAN (VLAN)

• Support  IGMP and MLD Snooping

• Support Auto Surveillance and Auto Voice VLAN

• Broadcast, Unicast and Multicast Storm Control

• Support Smart IP-MAC-Port Binding

• Support IEEE 802.1p QOS and COS

• 802.1x port-base Authentication through RADIUS servers

This converter converts 1000BASE-T twisted-pair signals to 1000BASE-SX/LX multi-mode/single-mode fiber signals.

• 24 x 10/100/1000BASE-T PoE ports • 2 x Gigabit SFP ports • 2 x 10G SFP+ ports • Layer 2 management and security with Layer 3 capabilities • Static Routing and MSTP • 193 W PoE budget

• Four Gigabit Ethernet port with one hard Drive Extension Slot • Manage up to 64 wireless APs and upgradable to 256 APs per controller • Manage up to a maximum of 1024 APs in a Controller cluster • Self-healing and self-optimizing technology combined with 4+4 wireless controller redundancy and RF scanning • Concurrent Captive Portal for authentication users in wired or wireless deployment • Centralized RF,Security , Firewall, VPN, Content Filtering and Policy Management • Support 802.1x port-based access control and guest VLAN • Wireless Intrusion Detection & Prevention System (WIDS)

• Blazing performance  reaching up to 1 Gbps of network throughput

• 2.4 GHz 802.11n supports up to 300 Mbps and 5 GHz 802.11ac supports up to 867 Mbps

• IP 67-compliant housing to withstand very harsh weather conditions

• Up to 32 virtual access points may be created using a single access point

• Support up to 16 SSIDs  per frequency band and 32 SSIDs per AP

• Automatic load-balancing between linked Access Points

• Flexible Wi-Fi QoS schemes, allowing for controlled and balanced access

• Supports 802.3at Power over  Gigabit Ethernet to be installed in remote locations

• Support Dynamic Auto-Channel Selection, Automatic RF Adjustment and Auto Power management

 

• 24 Port 10/100/1000 Base-T with 2 Gigabit SFP Ports • Equipped with 802.3az Energy Efficient Ethernet (EEE) Complaint • Support IEEE 802.1Q VLAN traffic segregation • Auto Surveillance VLAN for easy integration with IP-based surveillance systems • Loopback detection (LBD) and broadcast storm control to avoid network downtime • Quality of Service (QOS) and bandwidth control to ensure smooth operation • Cable diagnostics function to help troubleshooting wiring problem • Support Web-based GUI, Smart Console, Network Assistance Utility"

The DMC-515C converts 10/100Mbps 10BASE-T-100BASE-TX Fast Ethernet twisted pair signals to 100BASE-FX single-mode signals up to 15KM apart.

• 16 x 10/100/1000BASE-T ports • 2 x Gigabit SFP ports • 2 x 10G SFP+ ports • Layer 2 management and security with Layer 3 capabilities • Static Routing and MSTP

- Convert an SFP Fiber Interface into a 1000Base-T Copper Uplink

- Hot Pluggable

- IEEE 802.3ab 1000Base-T Compliant

- Up to 1.25Gbps Bi-directional Data when Combined with an Additional DGS-712

• IEEE 802.11n wireless • High-speed wireless speeds of up to 300 Mbps • Gigabit LAN port • Traffic control/QoS • Supports WPA2™ - WiFi security for more protection • Supports 802.3af Power over Ethernet • Wall and ceiling mounting brackets included