How to: Update firmware on DCS-5222L
How to: Update firmware on DCS-5222L
Step 1: Connect the power of the camera and connect LAN cable from the camera to your router.
Step 2: Run the CD that come with the camera on your computer.
Step 3: Click on next
Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ Click on Next
Step 5: Click on Next
Step 6: Click on Next
Step 7: Click on Next
Step 8: Click on Next
Step 9: Click on Yes.
Step 10: Copy down the IP address of the DCS-5222L show in the list.
Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK.
Step 13: Click on Maintenance > Firmware Upgrade.
Step 14: Click on Browse
Step 15: Select the firmware that you have downloaded and click on Open.
Step 16: Click on Upload.
Step 17: Wait for the upload of firmware to be finish.
Step 18: After firmware upgrade. Click on Maintenance -> System -> Restore Factory Defaults to restore the setting back to factory default.
Thank you