How to: Setup Motion Detection snapshot to Email for DCS-5222LB1
How to: Setup Motion Detection snapshot to Email for DCS-5222LB1
Step 1: Connect the power of the camera and connect LAN cable from the camera to your router.
Step 2: Run the CD that come with the camera on your computer.
Step 3: Click on next
Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ Click on Next
Step 5: Click on Next
Step 6: Click on Next
Step 7: Click on Next
Step 8: Click on Next
Step 9: Click on Yes.
Step 10: Copy down the IP address of the DCS-5222L show in the list.
Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK.
Step 13: Click on Setup > PTZ setup.
Step 14: Under the Live Video section, configure the following;
a) Tick Enable Video Motion
b) Tick Enable PIR
c) Select the area you want motion to be detected.
d) Click on Save Settings
Step 15: Click on Setup > Event setup
Step 16: Under Server, click on Add.
Step 17: Under Server Type,
a) Give a Server Name.
b) Select Email.
c) Enter the Sender email address
d) Enter the Recipient email address
e) Enter the Server address of the sender email address.
f) Enter the Username & Password of the sender email address
g) Enter the SMTP port number.
h) Either put a tick or not on the box for This server requires a secure connection (StartTLS) according to the sender’s mail server setting.
Step 18: Click on Save Settings
Step 19: Under Media, click on Add.
Step 20: Under Media Type,
a) Give a Media Name.
b) Select Snapshot.
c) Select Profile for Source
d) Put 3 for pre-event image
e) Put 7 for post-event image
f) Give a name for File Name Prefix.
g) Tick the box for Add date and time suffix to file name.
h) Click on Save Settings.
Step 21: Under Event, click on Add.
Step 22: Under Event,
1) Give a Event name.
2) Tick the box for Enable this event.
3) Select Video motion detection under Trigger.
4) Select Always under Event Schedule
Step 23:
1) Select the server name you had created.
2) Select the attached media name that you had created
3) Click on Save Setting.
Thank you