How to: Setup always recording to D-Link NAS for DCS-5222LB1
How to: Setup always recording to D-Link NAS for DCS-5222LB1
Step 1: Connect the power of the camera and connect LAN cable from the camera to your router.
Step 2: Run the CD that come with the camera on your computer.
Step 3: Click on next
Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ Click on Next
Step 5: Click on Next
Step 6: Click on Next
Step 7: Click on Next
Step 8: Click on Next
Step 9: Click on Yes.
Step 10: Copy down the IP address of the DCS-5222L show in the list.
Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK.
Step 13: Click on Setup > Event setup
Step 14: Under Server, click on Add.
Step 15: Under Server Type, Give a Server Name.
Step 16: Select Network Storage
a) Enter the network path which you want the files to save to Network Storage Location.
b) Enter the user name and password which you assign to the folder to User name.
c) Click on Save Settings.
Step 17: Under Recording, Click on Add.
Step 18: Under Recording,
a) Give a Recording entry name.
b) Check the box to Enable this recording.
Step 19: Under Recording Settings,
a) Select SAMBA for Destination.
b) Put 2000000 for Total cycling recording size.
c) Select Size of each file for recording 10 Mbytes.
d) Give a File Name Prefix.
e) Click on Save Settings.
Thank you