How do I set up my DIR-880L router ?
How do I set up ?
Step 1: Unplug the power to your Cable/DSL Internet modem.
Step 2: Position your router close to your modem and a computer for the initial setup process. Once
your router is set up, place the router in an open area of your intended work area for better wireless
coverage.
Step 3: Unplug the Ethernet cable from your modem (or existing router if upgrading) that is connected
to your computer and plug it in to one of the ports labelled LAN on the back of your DIR-880L.
Step 4: Plug one end of the included Ethernet cable that came with your router into the yellow port
labeled INTERNET on the back of the router. Plug the other end of this cable into the Ethernet port on
your modem.
Note: This unit is to be used with power supply model WA-36C12R.
Step 5: Reconnect the power adapter to your cable or DSL broadband modem and wait for two minutes.
Step 6: Connect the supplied power adapter to the power receptor on the back of the router and then
plug it into a power outlet or surge protector. Press the power button and verify that the power LED is lit.
Allow 1 minute for the router to boot up.
Note: This unit is to be used with power supply model WA-36C12R.
step 7: Open an Internet browser (such as Internet Explorer) and enter http://dlinkrouter.local or
http://192.168.0.1 into the address bar.
Step 8: If this is your first time logging in to the router, the Setup Wizard will start automatically.
This wizard will guide you through a step-by-step process to configure your new D-Link router and
connect to the Internet. You can select a different language using the drop-down menu in the bottom
left-hand corner of the window. Click Next to continue.
Wait while your router detects your Internet connection type. After the router detects your Internet
connection, you may need to enter information such as a username and password. This information
should be provided by the company that provides your Internet, also known as an Internet Service
Provider (ISP).
Step 9: If the router does not detect a valid Internet connection, a list of connection types to choose
from will be displayed. Select your Internet connection type (this information can be obtained from your
Internet service provider) and click Next to continue.
Select your Internet connection type: DHCP Connection (Dynamic IP Address) or Username/Password
Connection (PPPoE), or Static IP Address Connection.
DHCP Connection (Dynamic IP Address) – This type of connection is most commonly used for cable
Internet services. You will most likely not need to provide any extra information if you use this
connection type.
Username/Password Connection (PPPoE) – This type of connection is most commonly used for DSL
Internet connections. You will most likely need to provide some additional information before you can
connect to the Internet:
• Username – Your Internet username (provided by your Internet Service Provider)
• Password – Your Internet password (provided by your Internet Service Provider)
Static IP Address Connection – If the router detected or you selected this type of connection, enter the
IP Address, Subnet Mask, Gateway Address, Primary DNS Address, and Secondary DNS Address
supplied by your ISP. Click Next to continue.
Step 10: Enter the required information, and click Next to continue.
Step 11: For both the 2.4 GHz and 5 GHz wireless frequencies, create a name (SSID) for your Wi-Fi
networks. Each Wi-Fi network will also need a password of at least 8 characters. Your wireless clients
will need to have this password to be able to connect to your wireless network. Click Next to continue.
(Password suggestion: It is suggested that you choose a password that is easy for you to remember but,
difficult for others to guess. Strong passwords should include a combination of letters and numbers).
Step 12: In order to further secure your router, create a password to access the router’s web-based
configuration interface. This should be different from the password to connect to the Wi-Fi network.
Enter your password in the Device Admin Password field provided, Click Next to continue.
Step 13: The Summary window will display your settings. Click Next if you are satisfied, or click Back to
make changes.
mydlink™ Cloud Services registration:
With mydlink Cloud Services you can remotely manage, control, and monitor your home network from
anywhere using the mydlink mobile apps or mydlink web portal. You can check up on your network’s
Internet activity, and see what devices are connected to your network. You can also use the mydlink
SharePort app to remotely access content on a USB drive connected to your router.
You may choose Next to register this device with mydlink for free. Or you may choose Skip to register
later.
To get started with mydlink Cloud Services, you are required to have a mydlink account, and need to
register this router to your mydlink account. Select Yes, I have a mydlink account if you have previously
registered a mydlink account; or select No, I want to register and login with a new mydlink account if
you would like to create a new mydlink account.
a) If you selected “Yes, I have a mydlink account,” enter your existing mydlink account name and
password. Then click Login.
b) If you selected “No, I want to register and login with a new mydlink account,” fill in the required
information and check the I Accept the mydlink terms and conditions box in order to create a new
mydlink account.
Note: Your mydlink password is the password to log in to the mydlink web portal and mydlink mobile
apps. This is NOT the same as your router’s login information or wireless security password.
Step 14: At the end of the wizard, you will be presented with a final summary of your settings. Click
Finish to close the wizard.
Once the changes have been saved, you will return to the main page of the router’s configuration
interface. From here you can use the on-screen network map to view the current status of devices and
components on your network.