52-Port Layer 3 Lite Smart Managed Gigabit Switch with 2 10G Uplink


52-Port Layer 3 Lite Smart Managed Gigabit Switch with 2 10G Uplink

• 48 Ports 10/100/1000 Base-T + 2 SFP Ports + 2 x 10G SFP+ Slots
• Physical Stacking via two 10 Gigabit SFP+ Ports with stacking up to six device
• Virtual stacking of up to 32 units via D-link’s Single IP Management (SIM)
• Built-in SNMP MIB for remote Network Management Systems
• Support G.8032 ERPS to achieve high reliability  and network stability
• Auto Surveillance (ASV), Auto Voice VLAN for VoIP and Video Surveillance deployments.
• 802.1X port based authentication, for authentication through external RADIUS servers
• IEEE 802.3az Energy Efficient Ethernet with  D-Link Green 3.0 power-saving features
• Loopback Detection automatically disables port or VLAN when a loop is detected
• Support Layer 2 Features – IGMP & MLD Snooping, 802.3x  Flow control  and LLDP

Advanced Features
• Single IP Management (Virtual Stacking), stack up to 32 devices
• Physical Stacking via 2 10G ports, stack up to 6 devices
• Static Routing
• IPv6 Management Support
• Auto Surveillance VLAN
• Auto Voice VLAN
• Loopback Detection automatically disables a port or VLAN when a loop is detected
• Configurable MDI/MDIX
Security Features
• Access Control List
• D-Link Safeguard Engine
• Port Security
• ARP Spoofing Prevention
• IP-MAC-Port Binding
• DoS Attack Prevention
Intuitive Management
• D-Link Network Assistant Utility or Multi-language Web-based GUI
• Built-in SNMP MIB for remote NMS (D-View 6.0)
• Full CLI via console port
• IPv4/IPv6 Stack
• Dual Image
Green Technology
• IEEE 802.3az Energy Efficient Ethernet
• D-Link Green 3.0 power-saving features

The DGS-1510 Series is D-Link’s latest generation of SmartPro switches with 10G port connectivity, making them ideal for deployment in SME/SMB core environments. The DGS-1510 Series provides a reliable, scalable, and modular interconnection between core switches and edge switches with rich capabilities and simplified flexibility. Available in 16, 24 or 48 10/100/1000 Mbps port models, these switches also include 2 Gigabit SFP ports and 2 10G SFP+ ports. The DGS-1510 Series now features an IEEE 802.3at certified 24 10/100/1000 Mbps PoE model which is ideal for simplyfing deployment of VoIP phones and network cameras. The DGS-1510 Series PoE-enabled switches are ideal for businesses looking to power VoIP phones, wireless access points or network cameras. The DGS-1510-28P 24-port PoE Switch supports up to 30 W of power output giving you flexibility in power allocation for a variety of powered devices enabling you to scale your operations to meet business growth, incorporate new technologies all with affordable installation costs.

Two 10G SFP+ Stacking/Uplink Ports

Depending on whether linear or fault-tolerant ring stacking is implemented, users can use one or two 10-Gigabit SFP+ ports to create a physical stack. 6 units or 288 Gigabit ports can be configured as a stack using optional direct attach cables to provide high bandwidth on the DGS- 1510 Series with cost efficiency. Users can mix from any of the DGS-1510 SmartPro series in a single stack to allow simultaneous and easy configuration, management and troubleshooting.

Flexibility and Scalability

The DGS-1510 Series supports virtual stacking via D-Link’s Single IP Management (SIM), allowing up to 32 devices to be managed via a single IP. This simplifies management of small workgroups or wiring closets while allowing the network to be scaled to handle increased bandwidth demand. SIM reduces the number of IP address needed in your network and allows switches to be stacked together over Ethernet instead of using physical uplink or stacking ports. This eliminates the need for specialised stacking cables and removes distance barriers that can limit topology options when using other stacking technology.

About D-Link

24 x 7 Technical Hotline :

6501 4200

Mon-Sun 9am - 6pm
Chinese  Bahasa 9am-6pm (M-F)
MY : 1800-88-2880
ID : 0800-14014-97
PH :1800-1-888-3565
TH : 66-2661 7997