Product Description
24-Port Layer 3 Stackable 10G Switch with 1 Expansion Slot
• 24 Port 10 Gigabit SFP +
• Attain up to 480G stacking bandwidth with four devices functioning together as one
• Supports Lossless Ethernet Feature via Data Center Bridging (DCB)
• Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN)
• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)
• Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
• Switch Resource Management (SRM) for flexible management of system resources
• Physical Stacking via four 10G ports, can stack up to 4 devices
• Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
Description
The D-Link DXS-3600 Series Layer 3 Stackable 10G Managed Switches are a set of new, compact, high-performance switches that feature very low latency wire speed 10G Ethernet switching and routing. The 1U height and selectable front-to-back or back-to-front air flow make the DXS-3600 Series suitable for enterprise and campus aggregation network environments. The DXS-3600 Series switches have 8 or 24 fixed 10G SFP+ ports and can accommodate more ports with the addition of an expansion module. The expansion modules not only provide extra 10G SFP+ ports, but also increase flexibility by allowing 120G stacking, 40G uplinks, or low-cost 10GBASE-T connections for different applications.
Convenient Deployment
The DXS-3600 Series provides your network with high-performance 10G Ethernet switching capacities of up to 960 Gbps and forwarding rates of up to 714 Mpps. These switches feature hot-swappable power supplies and fan trays, which enable the switches to have redundant, high-availability architecture. The modular power design allows customers to use AC or DC power sources according to where the switch is deployed. When inserting two power modules, both power modules share the load and help to extend the lifetime of the other. The DXS-3600 Series also features a modular fan design; three fans can back up each other, providing 2+1 redundancy for the system. If a fan fails or the temperature rises, the smart fans will adjust their speed automatically.
Flexible Software
The DXS-3600 Series can be deployed using one of two different software images. The Standard Image (SI) features a wide range of Layer 2, VLAN, multicasting, Quality of Service (QoS), security, data center, and static routing functions. The Enhanced Image (EI) features comprehensive IPv4/v6 routing including RIP, VRRP, OSPF, BGP, and L3 multicasting features such as IGMP, MLD, PIM-DM, SM, SDM, SSM, and DVMRP. The Enhanced Image (EI) also supports L2/L3 MPLS VPN which enables the DXS-3600 Series to be deployed as the core router of an enterprise environment, or as an aggregation switch in an MPLS environment.
Data Center Features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The DXS-3600 Series switches support several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, and IEEE 802.1Qau. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control to ensure there is no data loss during network congestion. IEEE 802.1Qaz (Enhanced Transmission Selection) manages the allocation of bandwidth based on different traffic classes. IEEE 802.1Qau (Congestion Notification) provides congestion management for data flows within network domains to avoid congestion. The DXS-3600 Series switches also support cut-through switching, which reduces latency when transmitting data in a network.
Energy-Efficient
The DXS-3600 Series allows users to manage airflow by using different power and fan module configurations. Selectable front-to-back or back-to-front airflow optimizes air circulation to provide more effective cooling throughout rack systems in data centers where the switches are used when compared to side-to-side airflow. The switches also feature built-in smart fans. Internal heat sensors monitor and detect temperature changes and automatically adjust the fan speed accordingly. At lower temperatures, the fans will run slower, reducing both the switch’s power consumption and noise.
Available expansion modules
DXS-3600-EM-4XT 4-port 10GBASE-T expansion module
DXS-3600-EM-8T 8-port 1000BASE-T expansion module
DXS-3600-EM-4QXS 4-port 40G QSFP+ expansion module
DXS-3600-EM-8XS 8-port 10G SFP+ expansion module
Available cables
DEM-CB100QXS 40GbE QSFP+ to QSFP+ 1m Direct Attach Cable
DEM-CB100QXS-4XS 40GbE QSFP+ to 4x 10G SFP+ 1m Direct Attach Cable
DEM-CB300QXS 40GbE QSFP+ to QSFP+ 3m Direct Attach Cable
Leave a reply Cancel reply
You must be logged in to post a comment.
Returns and Exchanges
There are a few important things to keep in mind when returning a product you purchased.You can return unwanted items by post within 7 working days of receipt of your goods.
- You have 14 calendar days to return an item from the date you received it.
- Only items that have been purchased directly from Us.
- Please ensure that the item you are returning is repackaged with all elements.
Ship your item back to Us
Firstly Print and return this Returns Form to:
30 South Park Avenue, San Francisco, CA 94108, USA
Please remember to ensure that the item you are returning is repackaged with all elements.
For more information, view our full Returns and Exchanges information.
Related Products
24-Port Layer 3 Stackable 10G Switch with 1 Expansion Slot
24-Port Layer 3 Stackable 10G Switch with 1 Expansion Slot
• 24 Port 10 Gigabit SFP +
• Attain up to 480G stacking bandwidth with four devices functioning together as one
• Supports Lossless Ethernet Feature via Data Center Bridging (DCB)
• Support IEEE 802.1Qbb (PFC) , IEEE 802.1Qaz (ETS), IEEE 802.1Qau (CN)
• Switch supports a two rate and single-rate Three Color Marker (trTCM/srTCM)
• Support ITU-T G.8032 Ethernet Ring Protection Switching (ERPS)
• Switch Resource Management (SRM) for flexible management of system resources
• Physical Stacking via four 10G ports, can stack up to 4 devices
• Virtual Stacking/Clustering of up to 32 units via D-Link Single IP Management
The D-Link DXS-3600 Series Layer 3 Stackable 10G Managed Switches are a set of new, compact, high-performance switches that feature very low latency wire speed 10G Ethernet switching and routing. The 1U height and selectable front-to-back or back-to-front air flow make the DXS-3600 Series suitable for enterprise and campus aggregation network environments. The DXS-3600 Series switches have 8 or 24 fixed 10G SFP+ ports and can accommodate more ports with the addition of an expansion module. The expansion modules not only provide extra 10G SFP+ ports, but also increase flexibility by allowing 120G stacking, 40G uplinks, or low-cost 10GBASE-T connections for different applications.
Convenient Deployment
The DXS-3600 Series provides your network with high-performance 10G Ethernet switching capacities of up to 960 Gbps and forwarding rates of up to 714 Mpps. These switches feature hot-swappable power supplies and fan trays, which enable the switches to have redundant, high-availability architecture. The modular power design allows customers to use AC or DC power sources according to where the switch is deployed. When inserting two power modules, both power modules share the load and help to extend the lifetime of the other. The DXS-3600 Series also features a modular fan design; three fans can back up each other, providing 2+1 redundancy for the system. If a fan fails or the temperature rises, the smart fans will adjust their speed automatically.
Flexible Software
The DXS-3600 Series can be deployed using one of two different software images. The Standard Image (SI) features a wide range of Layer 2, VLAN, multicasting, Quality of Service (QoS), security, data center, and static routing functions. The Enhanced Image (EI) features comprehensive IPv4/v6 routing including RIP, VRRP, OSPF, BGP, and L3 multicasting features such as IGMP, MLD, PIM-DM, SM, SDM, SSM, and DVMRP. The Enhanced Image (EI) also supports L2/L3 MPLS VPN which enables the DXS-3600 Series to be deployed as the core router of an enterprise environment, or as an aggregation switch in an MPLS environment.
Data Center Features
Data Center Bridging (DCB) is an essential set of enhancements to Ethernet for networking in data center environments. The DXS-3600 Series switches support several core components of Data Center Bridging (DCB) such as IEEE 802.1Qbb, IEEE 802.1Qaz, and IEEE 802.1Qau. IEEE 802.1Qbb (Priority-based Flow Control) provides flow control to ensure there is no data loss during network congestion. IEEE 802.1Qaz (Enhanced Transmission Selection) manages the allocation of bandwidth based on different traffic classes. IEEE 802.1Qau (Congestion Notification) provides congestion management for data flows within network domains to avoid congestion. The DXS-3600 Series switches also support cut-through switching, which reduces latency when transmitting data in a network.
Energy-Efficient
The DXS-3600 Series allows users to manage airflow by using different power and fan module configurations. Selectable front-to-back or back-to-front airflow optimizes air circulation to provide more effective cooling throughout rack systems in data centers where the switches are used when compared to side-to-side airflow. The switches also feature built-in smart fans. Internal heat sensors monitor and detect temperature changes and automatically adjust the fan speed accordingly. At lower temperatures, the fans will run slower, reducing both the switch’s power consumption and noise.
Available expansion modules
DXS-3600-EM-4XT 4-port 10GBASE-T expansion module
DXS-3600-EM-8T 8-port 1000BASE-T expansion module
DXS-3600-EM-4QXS 4-port 40G QSFP+ expansion module
DXS-3600-EM-8XS 8-port 10G SFP+ expansion module
Available cables
DEM-CB100QXS 40GbE QSFP+ to QSFP+ 1m Direct Attach Cable
DEM-CB100QXS-4XS 40GbE QSFP+ to 4x 10G SFP+ 1m Direct Attach Cable
DEM-CB300QXS 40GbE QSFP+ to QSFP+ 3m Direct Attach Cable
Specifications
High performance | 960/480 Gbps switching capacity 24/8 fixed 10 Gigabit SFP+ ports |
|
High availability | Hot-swappable power modules for power redundancy and load sharing Hot-swappable fan trays with airflow control provide cooling redundancy Up to 480G stacking1 bandwidth with four devices functioning together as one |
|
Security | Access Control List Port Security Traffic Segmentation Broadcast/Multicast/Unicast Storm Control DoS Attack Prevention |
|
Advanced Features | MPLS/OSPF/BGP Three Colour Marker – Classifying network traffic for QoS |
|
Management | Web-based GUI Command Line Interface (CLI) RADIUS/TACACS+ LLDP/LLDP-MED |
|
Interface | ||
Number of 10 Gigabit SFP+ ports | DXS-3600-16S - 8 ports DXS-3600-32S - 24 ports |
|
Number of open expansion module | One expansion module | |
RS-232 console port | Yes | |
Management port | 10/100/1000BASE-T RJ-45 ethernet for out-of-band remote management | |
SD card slot | Yes | |
Performance | ||
Switch Capacity | DXS-3600-16S - 480 Gbps DXS-3600-32S - 960 Gbps |
|
Maximum Forwarding Rate | DXS-3600-16S - 357.14 Mpps DXS-3600-32S - 714.28 Mpps |
|
Packet Buffer | 9 MB | |
MAC address table | 128K entries | |
Physical & Environmental | ||
Power Input | 100 to 240 VAC, 50 to 60Hz Internal Universal Power Supply | |
Power Consumption (max) | XS-3600-16S - 74.3W (without expansion module) DXS-3600-32S - 116.8W (without expansion module) |
|
Standby Power Consumption | DXS-3600-16S - 69.9W DXS-3600-32S - 88.2W |
|
Heat Dissipation (max) | DXS-3600-16S - 253.36 BTU/hr (without expansion module) DXS-3600-32S - 398.29 BTU/hr (without expansion module) |
|
Heat Dissipation (standby) | DXS-3600-16S - 238.36 BTU/hr DXS-3600-32S - 300.76 BTU/hr |
|
Dimensions (W x D x H) | 440 x 506 x 44 mm (17.32 x 19.92 x 1.73 inches) | |
Weight | DXS-3600-16S - 9.89 kg (21.8 pounds) DXS-3600-32S - 10.71 kg (23.6 pounds) |
|
Temperature | Operating: 0° to 45°C Storage: -40° to 70°C |
|
Operating Humidity | Operating: 0% ~ 95% Non-condensing Storage: 0% ~ 95% Non-condensing |
|
EMI/EMC | FCC, CE, C-Tick, IC, VCCI | |
Safety | CB, cUL, LVD | |
Software Feature | ||
Standard Image (SI) Features | ||
Stackability | Physical Stacking1 480G stacking bandwidth Up to 4 switches in a stack Ring/chain topology support Virtual Stacking/Clustering of up to 32 units Supports D-Link Single IP Management |
|
L2 Features | ||
MAC Address Table | 128K entries | |
Flow Control | 802.3x Flow Control when using Full Duplex Back Pressure when using Half Duplex~HOL Blocking Prevention |
|
Spanning Tree Protocol | 802.1D STP 802.1w RSTP 802.1s MSTP Supports Root Restriction |
|
Jumbo Frame | Up to 12,000 bytes | |
802.1AX Link Aggregation | Max. 16 groups per device, 12 ports per group | |
ERPS (Ethernet Ring Protection Switching) | ||
Port Mirroring | Supports One-to-One, Many-to-One Supports Mirroring for Tx/Rx/Both Supports 4 mirroring groups |
|
Flow Mirroring | Supports One-to-One, Many-to-One Supports Mirroring for Rx Supports 4 mirroring groups |
|
Loopback Diagnostics2 | ||
L2 Multicast Features | ||
L2 Multicast Filtering | Forwards all groups Forwards all unregistered groups Filters all unregistered groups |
|
MLD Snooping2 | MLD v1/v2 Snooping Supports 4K groups Host-based MLD Snooping Fast Leave IGMP Snooping |
|
IGMP v1/v2/v3 Snooping | Supports 4K IGMP groups~Supports 1K static multicast addresses IGMP per VLAN |
|
L3 Features | ||
ARP | 512 Static ARP Supports Gratuitous ARP2 |
|
IP Interface | Supports 256 interfaces | |
Loopback Interface2 | ||
L3 Routing | ||
Static Routing | Max. 1K IPv4 entries Max. 512 IPv6 entries2 Supports route distribution Supports secondary route Supports Equal Cost/Weighted Cost multi-path route |
|
Default Routing | ||
VLAN | 802.1Q 802.1v |
|
Double VLAN (Q-in-Q) | Port-based Q-in-Q Selective Q-in-Q |
|
Port-based VLAN | ||
MAC-based VLAN | ||
Subnet-based VLAN | ||
Private VLAN | ||
VLAN Group | Max. 4K static VLAN groups Max. 4094 VIDs |
|
GVRP | Up to 4K dynamic VLANs | |
AAA | ||
802.1X Authentication | upports Port-based access control Supports Host-based access control Dynamic VLAN Assignment Identity-driven Policy (VLAN/ACL/QoS) Assignment |
|
Web-based Access Control (WAC) | ||
MAC-based Access Control (MAC) | ||
Guest VLAN | ||
QoS (Quality of Service) | 802.1p Quality of Service 8 queues per port |
|
Queue Handling | Strict Weighted Round Robin (WRR) Strict + WRR Round Robin (RR) Weighted Deficit Round Robin (WDRR) |
|
QoS based on | 802.1p Priority Queues DSCP IP address MAC address VLAN IPv6 Traffic Class IPv6 Flow Label TCP/UDP port |
|
Bandwidth Control | Port-based (Ingress/Egress, min. granularity 8 Kb/s) Flow-based (Ingress/Egress, min. granularity 8 Kb/s) Per queue bandwidth control (min. granularity 8 Kb/s) |
|
Three Color Marker | trTCM srTCM |
|
Congestion Control | WRED | |
Support for following actions: | Remark 802.1p priority tag Remark TOS/DSCP tag~Bandwidth Control Committed Information Rate (CIR) |
|
Access Control List (ACL) | ||
ACL based on: | 2.1p priority VLAN MAC address EtherType IP address DSCP Protocol type TCP/UDP port number IPv6 Traffic Class IPv6 Flow Label |
|
Max. ACL entries: | 1792 ingress ACL rules 1K egress ACL rules 1K VLAN ACL rules |
|
Time-based ACL | ||
Security | ||
Port Security | Supports up to 12K MAC addresses per port/system | |
Broadcast/Multicast/Unicast Storm Control | ||
D-Link Safeguard Engine | ||
DHCP Server Screening | ||
IP-MAC-Port Binding | ARP inspection IP inspection DHCP Snooping |
|
ARP Spoofing Prevention | Max. 64 entries | |
Traffic Segmentation | ||
SSL2 | Supports v1/v2/v3 Supports IPv4/v6 access |
|
SSH | ||
BPDU Attack Prevention | ||
DOS Attack Prevention | ||
Management | Web-based GUI CLI Telnet TFTP Client FTP Client Traffic Monitoring SNMP Supports v1/v2/v3 SNMP Trap System Log DHCP Client DHCP Server DHCP Relay Multiple Image Multiple Configuration Flash File System DNS Resolver CPU Monitoring MTU Setting Traceroute LLDP DNS Relay SMTP2 DHCP Auto Configuration2 SNTP RCP RMONv1 RMONv2 Trusted Host2 Password Encryption Debug Command |
|
Enhanced Image (EI) Additional Features | ||
L3 Multicasting | Multicast Table Size: 2K IGMP v1, v2, v3 PIM-SM PIM-DM PIM-Sparse-Dense Mode PIM-SSM DVMRP v3 MLD v1/v22 |
|
MPLS | LDP MPLS LSP trigger filtering MPLS label-forwarding MPLS QoS MPLS ping and traceroute L2 protocol tunneling through PW VPWS VPLS PW Redundancy |
|
L3 Features | ||
IPv6 Tunneling2 | Static ISATAP GRE 6to4 |
|
VRRP | ||
L3 VPN | ||
MPLS/BGP L3 VPN | ||
VRF-Lite | ||
MP-BGP | ||
VRF aware application | ||
L3 Routing | ||
Supports 16K hardware routing entries shared by IPv4/IPv6 | Max. 16K IPv4 entries Max. 8K IPv6 entries2 |
|
Supports 8K hardware L3 forwarding entries shared by IPv4/IPv6 | Max. 8K IPv4 entries Max. 4K IPv6 entries2 |
|
RIP | RIP v1/v2 RIPng2 |
|
OSPF | OSPF v2 OSPF v32 OSPF Passive Interface Stub/NSSA Area OSPF Equal Cost Route |
|
BGPv4 | ||
Route Redistribution | ||
IP Directed Broadcast | ||
Policy Based Route2 | ||
Standards | ||
MIB & RFC Standards | RFC1213 MIB II RFC1907 SNMP v2 MIB RFC5519 IGMP v3 MIB RFC1724 RIP v2 MIB RFC2021 RMONv2 MIB RFC1643, RFC2358, RFC2665 Ether-like MIB RFC4836 802.3 MAU MIB RFC4363 802.1p MIB RFC2618 RADIUS Authentication Client MIB RFC4292 IP Forwarding Table MIB RFC2932 IPv4 Multicast Routing MIB RFC2934 PIM MIB for IPv4 RFC2620 RADIUS Accounting Client MIB RFC2925 Traceroute MIB RFC2925 Ping MIB RFC1850 OSPF MIB Private MIB RFC1112, RFC2236, RFC3376, RFC4541 IGMP Snooping RFC4363 802.1v RFC2338 VRRP RFC1058, RFC1388, RFC1723, RFC2453, RFC2080 RIP RFC1370, RFC1765, RFC2328, RFC2740, RFC3101 makes RFC1587 obsolete, RFC2328 makes RFC1583, RFC2178 OSPF v2,v3 RFC1771, RFC1997, RFC2439, RFC2796, RFC2842, RFC2918 BGP RFC3973 PIM-DM RFC5059 PIM-SM RFC3569, RFC4601, RFC4608, RFC4607, RFC4604 PIM SSM RFC3376 IGMP RFC2475 Priority Queue Mapping RFC2475, RFC2598 Class of Service (CoS) RFC2597, RFC2598 QoS Flow Actions RFC2697, RFC2698 Three Color MarkerRFC2093, RFC2904, RFC2095, RFC2906 AAA RFC1321, RFC2144, RFC2313, RFC2420, RFC2841, RFC3394 Encryption RFC2289 One-Time RFC3580 802.1X RFC2866 RADIUS Accounting RFC2138, RFC2139, RFC2865, RFC2618 RADIUS Author. for Management Access RFC1492 TACACS+ Auth. for Management Access RFC2068, RFC2616 Web-based GUI RFC854 Telnet Server RFC783, RFC1350 TFTP Client RFC1157, RFC1901, RFC1908, RFC2570, RFC2574, RFC2575, RFC3411-17 SNMP RFC3164 System Log RFC2819 RMON v1 RFC951, RFC1542, RFC2131, RFC3046 BootP/DHCP Client RFC1769 Time Setting RFC2131 DHCP Server RFC1191 MTU Setting RFC1065, RFC1066, RFC1155, RFC1156, RFC2578 MIB Structure RFC1215 MIB Traps Convention RFC4188 Bridge MIB RFC1157, RFC2571-2576, RFC3411-3415, RFC3418 SNMP MIB RFC1901-1908,RFC1442, RFC2578 SNMP v2 MIB RFC2737 Entity MIB RFC768 UDP RFC791 IP RFC792 ICMP RFC793 TCP RFC826 ARP RFC1338, RFC1519 CIDR RFC2716, RFC3748 EAP RFC2571, RFC2572, RFC2573, RFC2574 SNMP |
Reviews
There are no reviews yet.