How to setup Repeater mode on my DIR-612 router?
How to setup Repeater mode on my router?
Step 1: Open your Internet browser and enter http://dlinkrouter, http://dlinkrouter.local, or http://192.168.0.1 into the address bar.
Step 2: The default username is Admin. Enter your administrator password. If you have not changed the default password, this field should be left blank. Click Login.
Step 3: Click the Wireless tab on the top and then click Wireless Repeater from the menu on the left-hand side.
Step 4: Check on Repeater Enabled checkbox as shown. You may key in the
desired SSID of the AP,
Or click on Site Survey to display the list of available APs for selection. Select the desired AP and Click Next to continue.
Step 5: Key in a desired Pre-Share Key in the field as shown. Click on Next to continue.
Step 6: Key in a desired IP Address in the field as shown. Please ensure the IP Address used is within same IP range address of the main router.
Step 7: Click on OK to continue.
Step 8: Click on Finish to complete the configuration. Please ensure to reboot the client device(Desktop/Notebook) to receive the new LAN IP address.
Note: The current SSID of the Repeater still remains as at previous Eg. “D-Link_DIR-612”.
You may continue to login in with this SSID with the Pre-Share Key as in Step 5 on your wireless device or follow the guide on changing the Wireless SSID and Password.