How to: Setup always recording to SD card for DCS-5222LB1
How to: Setup always recording to SD card for
Step 1: Connect the power of the camera and connect LAN cable from the camera to your router.
Step 2: Run the CD that come with the camera on your computer.
Step 3: Click on next
Step 4: Put a tick in the box beside ‘I accept these terms and conditions.’ Click on Next
Step 5: Click on Next
Step 6: Click on Next
Step 7: Click on Next
Step 8: Click on Next
Step 9: Click on Yes.
Step 10: Copy down the IP address of the DCS-5222L show in the list.
Step 11: Open Internet Explorer and enter the IP address of the camera that you had copy down on the URL bar.
Step 12: Enter the camera user name and password that had set during setting up of the camera. Click on OK.
Step 13: Click on Setup > Event setup
Step 14: Under Server, click on Add.
Step 15: Under Server Type, Give a Server Name.
Step 16: Select SD Card and press Save Settings.
Step 17: Under Recording, Click on Add.
Step 18: Under Recording,
1) Give a Recording entry name.
2) Check the box to Enable this recording.
Step 19: Under Recording Settings,
a) Select SD for Destination.
b) Put 2000000 for Total cycling recording size.
c) Select Size of each file for recording 10 Mbytes.
d) Give a File Name Prefix.
e) Click on Save Settings.
f)
Thank you